Wargames Terrain Bracket For Straight Pipe

An industrial pipe collar with bolted flanges — grimy sci-fi scenery in one small part. This is a wargames terrain bracket built to wrap a straight pipe run: a heavy circular clamp ring studded with hex bolt heads around its circumference, with a stepped mounting block on one side where the whole assembly would fix to a wall, gantry or bulkhead. The bolt-flanged look instantly sells an oil refinery, sewer, spaceship engine deck or post-apocalyptic sprawl. The kit includes the bracket at full size plus two reduced-scale versions, so you can outfit anything from 28mm heroics down to 6mm epic-scale tables from the same download. It is a scatter piece designed to connect to pipework — thread it onto a printed or dowel pipe, or use it as a standalone wall fitting. A handful of these break up long empty walls and give your board that lived-in, engineered density that photographs well. Print notes • FDM-friendly: stand the ring on its flat face so the bolt heads print without steep overhangs; supports only under the mounting block if you tilt it. • Print the matching small-scale files if you game at 15mm/10mm/6mm — they're pre-reduced for you. • 0.16–0.2mm layers are plenty for terrain; the chunky forms hide layer lines under paint. • Prime black, dry-brush steel or rust, then oil-wash the recesses to pop the bolts and panel gaps. Free to download — great for filling a whole table cheaply.