Baroque Acanthus Crest And Corner Set

Three scrolling acanthus carvings that give plain furniture a pulse. This CNC relief pack bundles a coordinated set of three: a symmetrical central crest capped by a rounded bud, flanked by a mirrored left-and-right pair of corner pieces whose leaves peel and curl toward a crisp inner angle. Every element is cut in the Baroque foliage tradition, with deep flutes running down each frond, rolled-over leaf tips, and shadowed undercuts that shift as light rakes across the surface. The crest sits happily above a cabinet door or mirror, while the two corners lock into the top corners of the same frame to close the composition. Furniture restorers, cabinetmakers and sign carvers will get the most from a set like this, though it also machines beautifully as standalone wall art on a contrasting backer board. Run it in a close-grained hardwood such as maple, cherry or tulipwood, where the fine leaf detail survives sanding. Cut notes • Depth: the model carries real relief, so allow 12 to 20 mm of stock and a roughing pass before finishing. • Bits: rough with a 3 to 6 mm ball nose, then chase the undercuts with a 1 to 2 mm tapered ball for the tight leaf valleys. • Orientation: machine flat; the corners are handed, so keep the pair as-is rather than mirroring one. • Finish: a coat of sanding sealer before stain stops the end-grain flutes drinking colour unevenly.